ConnectPlus · Monitoring
ConnectPlus J1000
ConnectPlus J1000 is an environment monitoring system for data centers and critical facilities. It sends SMS, email, LINE, and SNMP Trap alerts. ConnectPlus J1000 (Lite) is a variant on this page and has its own specification table, without the J1000 SMS, email, and LINE channels.
Highlights
- Web dashboard in Chrome, Firefox, Safari, and Edge, with configuration stored in the device
- Alerts by LINE, email, SMS, and SNMP Trap, with a repeat interval of 1 to 60 minutes or disabled
- Onboard history of up to 10,000 records, exportable to Excel and CSV
- 16 isolated dry-contact inputs, 4 analog inputs at 4–20 mA, and 4 Form C relay outputs
- 10/100 Mbps Ethernet and 2 RS485 Modbus RTU channels, up to 32 data points
- Built-in 4G LTE modem and three access levels (Admin, Manager, User) with SMS OTP password reset
Applications
- Data Centers and Server Rooms
- Telecommunication Hubs
- Industrial Control Rooms
- Healthcare and Laboratories
- Commercial Smart Buildings
Specifications
| Power supply | 12 – 24 Vdc |
|---|---|
| Display | LCD 4 x 20 Character |
| Dimensions | 340 × 155 × 45 mm (Width x Height x Depth) |
| Installation | Wall mount (4 Screws) |
| Processor | 2x Dual-Core @ 240 MHz |
| RAM | 32 MB |
| Historical data storage | Up to 10,000 Records |
| History export | Excel and CSV via web browser |
| Communication protocol | HTTP, SNMP Get/Trap, SMTP, NTP |
| SMS | 20 Number / Group (Max 200 Number) |
|---|---|
| 10 Recipient / Group (Max 100 Recipient) | |
| LINE | Up to 10 LINE Group |
| Alarm notification repeat time | 1 – 60 Minute or Disable |
| Port | RJ45 |
|---|---|
| Speed | 10/100 Mbps Base-T |
| Auto-MDI/MDIX | Fast Ethernet auto-negotiation speed with Auto-MDI/MDIX |
| SIM | Standard SIM (25 x 15 mm) |
|---|---|
| LTE FDD | B1(2100) / B3(1800) / B5(850) / B7(2600) / B8(900) / B20(800) MHz |
| LTE TDD | B38(2600) / B40(2300) / B41(2500) MHz |
| WCDMA | B1(2100) / B5(850) / B8(900) MHz |
| Antenna | SMA Female |
| Quantity | 16 Channel |
|---|---|
| Input type | Dry Contact (Volt-Free) |
| Isolation | Optocoupler Isolation |
| Input state | NO / NC (Normally Open / Normally Closed) |
| Quantity | 4 Channel |
|---|---|
| Input range | 4–20 mA |
| Resolution | 18-bit |
| Wiring | Pluggable terminal block, AI+ and AI- per channel |
| Quantity | 2 Channel |
|---|---|
| Protocol | Modbus RTU (Master Mode) |
| Data points | Up to 32 Data point |
| Baud rate | 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps |
| Cable distance | Up to 1,200 meters |
| Termination | 120 ? (Built-in) |
| Wiring | Pluggable terminal block, A+ and B- per channel |
| Quantity | 4 Channels |
|---|---|
| Contact type | Form C (SPDT) |
| Max switching voltage | 240Vac / 30Vdc (0-240 Vac / 0-30Vdc) |
| Max switching current | 1 A (Max) |
| Wiring | Pluggable terminal block, NO, COM, and NC |
Variants on this page
ConnectPlus J1000 (Lite)
ConnectPlus J1000 (Lite) is an environment monitoring gateway. The Lite brochure specifies SNMP Trap notification and does not list SMS, email, or LINE.
- Web monitoring and configuration in Chrome, Firefox, Safari, and Edge
- Real-time alarms by SNMP Trap to a DCIM platform or SNMP manager
- At least 10,000 alarm records, exportable to Excel and PDF
- 16 isolated dry-contact inputs, 4 analog inputs at 4–20 mA, and 4 relay outputs
- 10/100 Mbps Ethernet and 2 RS485 Modbus RTU channels, 32 data points
- Access levels Admin, Manager, and User
| Power supply | 12- 24 Vdc |
|---|---|
| Display | LCD 4 x 20 Character |
| Dimensions | 340 x 155 x 45 (Width x Heigh x Depth) mm. |
| Installation | Wall mount (4 Screws) |
| Digital input | 16 Channel (isolated dry contact) |
|---|---|
| Analog input | 4 Channel (4-20mA) |
| Relay output | 4 Channel (NO/NC) |
| RS485 Modbus RTU | 2 Channel (32 Data point) |
| Ethernet | 10/100 Mbps Base-T LAN (RJ45) |
|---|---|
| Communication protocol | HTTP, SNMP Get/Trap, NTP |
| Alarm records | at least 10,000 alarm records with timestamp |
|---|---|
| Export | Excel and PDF via web browser |
Related models
ConnectPlus J-Connect
ConnectPlus J-Connect is a centralized web-based environmental monitoring system for data centers. It collects devices over SNMP, Modbus, BACnet, and related protocols, and notifies operators from one dashboard.
ConnectPlus J100
ConnectPlus J100 converts email alerts into SMS and LINE messages for data centers and critical facilities that use DCIM software. A built-in 4G LTE modem sends the alerts without relying on the site's main internet connection.
ConnectPlus JPC6000
ConnectPlus JPC6000 is an edge monitoring gateway. It collects SNMP, Modbus, HTTP, and HTTPS data from field devices and forwards it to a centralized monitoring system.